Connecting Two Vcrs; Connecting A Camcorder - Toshiba 30HF83 Owner's Manual

Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another TV channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
VCR1
From Antenna
TV
Note:
If VCRI has S video,you can use an S video
cable instead of the standard video cable for
better picture performance. Do not connect
both a standard video cable and an S video
cable to VIDEO 1 (or VIDEO 2) at the same
time, or the picture performance will be
unacceptable
Do not connect the same VCRto the output
and inputjacks on the TVat the same time.
Todub or edit, VCR 2 must select Line IN,
and the 7V must seleet VIDEO 1 Csee
"Selecting the antenna input"on page 2 l).
VCR2
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set ofstandardA/V cables
The unauthorized recording, use,
distribution, or revision of television
programs,videotapes, DVDs, and other
materialsis prohibited under the
Copyright Lawsof the United States and
other countries, and may subject you to
civil and cdminal liability.
* The VideoOUTjack doesnot output the
POPpicture.
** TheAudio OUTjacks can output the sound
of either the Main or POPpicture Csee
"Selectingthe Audio OUT sound" on page
525.
Camco_er
Note:
ff your eamcorder has S video,you can use
an S video cable instead of the standard
video cable for better picture performance.
Do not connect both a standard video cable
and an S video cable at the same time, or the
picture performance will be unacceptable
Video-3 (front panel)
12