Changing The On-Screen Display Language; Selecting The Antenna Input; Select The Antenna Input - Toshiba ColorStream 32AFX61 Owner's Manual

Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen display of adjustment menus and messages.
To select an on-screen display language:
1. Press MENU, and then press • or _ until the SET UP menu
appears.
2. Press • or • to highlight LANGUAGE.
_SET UP
CLOCK SET
ANT1/2 ANT1
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
TILT CORRECTION 0
3. Press • or _ to highlight your desired language.
Selecting the antenna input
You can connect to two different antenna signal sources (ANT 1 or
ANT 2).
To select the antenna input using the menu system:
1. Press MENU, and then press • or _ to highlight the SET UP
menu.
2. Press • or • to highlight ANT 1/2.
®@®®@@
@SET UP
LANGUAGE ENGL I SH
CLOCK SET
_-..
TV/CABLE CABLE
CH PROGRAM )"
ADD/ERASE ADD
TILT CORRECTION
3. Press • or _ to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
Using the TV/VIDEO button to select the antenna input
To select the antenna input using the TV/VIDEO button:
1. Press the TV/VIDEO button on the TV (see illustrations below).
The current signal source displays in purple.
MENU
SOURCE SELECTON
ANT 2
ANT 1
VIDEO 1
VIDEO 2
VIDEO 3
ColorStream
Pressing TV/VlDEO on the TV
changes the current signal source.
SOURCE SELECTION
0:TV
1:VIDEO 1
2:VIDEO 2
3:VIDEO 3
4:ColorStream
0-4:TO SELECT
Pressing INPUT on the remote control
displays the currrent signal source.
(70 change the source, select 0-4;
to change the antenna input, use the menu
or the TV/VlDEO button on the TI/)
TV/VIDEO
22
32/36AFX61 (E]