Accessing Ice Maker And Dispenser Components - Jenn-Air JFX2897DRM Service Manual

COMPONENT ACCESS

Accessing Ice Maker and Dispenser Components

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Water Line at the Top of the French Door
1. Unplug the refrigerator or disconnect power.
2. Remove the hinge cover and unplug the wire harness.
3. Lift the lock on the connector.
4. Disconnect the water line.
5. Remove the screws and the hinge.
n
4-22 Four Door Bottom Mount
Ice Box Assembly
1. Complete the steps 1-11
Components instructions .
2. Disconnect electrical connections to ice box assembly.
3. Disconnect ice maker fill tube from water valve.
4. Locate the two 1/4" (6.4 mm) screws attaching the ice box
assembly and remove using 1/4" (6.4 mm) nut driver while
supporting ice maker.
from Refrigerator Compartment