Jenn-Air JFX2897DRM Service Manual page 55

Accessing Ice Maker and Dispenser Components (Continued)
5. Drop down the front of the ice maker assembly and slide out
to disengage the two tabs from the slots in the top of the
cabinet.
Ice Maker Fill-Tube
6. Remove foil fill tube heater from the ice maker fill-tube
on the ice box. Remove all wires from channel on ice box
assembly.
NOTE: Some models have an ice box fascia with fascia heater
wired through the foil fill tube heater, you may need to
remove the fascia heater wires and grommet from the ice box
cover.
A
7. Use a straight blade screwdriver to remove five,
1/4" (6.4 mm) screws securing the ice box cover to the ice
box assembly.
8. Remove ice box cover while guiding ice maker harness
through slot in ice box cover. Note lip for reassembly.
A
B
A. Grommet
B. Channel
A. Slot
A
9. Remove ice maker fill tube by pushing into ice box cover and
pulling through hole.
Four Door Bottom Mount
COMPONENT ACCESS
A. Lip
n
4-23