Britax BROOK Instructions Manual page 2

Installing the CozyFit
Press both brake pedals down to
1.
lock the parking brake (Fig. 1)
2. Recline the seat.
a. Lift and hold the recline
handle on the back of the
seat, and recline into the
lowest position (Fig. 2).
3. Release the harness by pressing
the button in the center of the
buckle while pulling the two
tongues away from the buckle
assembly (Fig. 3).
4. Pinch the waist strap tongues
while you separate them from
the shoulder strap. Place them to
the side (Fig. 4).
5. Place the wedge with the curved
side facing upward (Fig. 5).
Note: The wedge is for infants
weighing 10 lbs (4.5 kg) or more
ONLY and MUST be used until the
infant has sufficient head and
neck control.
6. Attach the head pad hook and
loop behind the liner (Fig. 6).
Note: The head pad MUST be
used for infants weighing 10 lbs
(4.5 kg) or more until the infant
has sufficient head and neck
control.
7. Place the liner on the toddler
seat aligning its openings with
the respective straps (Fig. 7).
8. Route the waist straps, shoulder
straps, and the buckle through
the liner slots (Fig. 8).
9. Align the waist strap tongues
with the shoulder strap retainers
and slide through until they click
locking into place (Fig. 9).
10. Slide the head pad up or down
for a proper adjustment (Fig. 10).
Insert
TM
Fig. 1
Fig. 3
Fig. 5
Fig. 7
Fig. 9
Fig. 2
Fig. 4
Fig. 6
Fig. 8
Fig. 10
Page 2 of 12