ViewSonic PJ358 User Manual page 45

OPTION Menu
OPTION Menu (continued)
Item
SERVICE
(contnued)
(contnued on next page)
ViewSonic
AUTO ADJUST
Using the ▲/▼ buttons enables/disables the
automatc adjustment. When DISABLE s selected,
the automatc adjustment feature s dsabled,
although rough adjustment s automatcally performed
dependng on the basc settng.
FINE ó FAST ó DISABLE
FINE: Fner tunng ncludng H.SIZE adjustment.
FAST: F aster tunng, settng H.SIZE to prearranged data for the
nput sgnal
• Dependng on condtons, such as nput mage, sgnal cable to
the projector, envronment around the projector, etc., the automatc
adjustment may not work correctly. In such a case, please
choose DISABLE to dsable the automatc adjustment, and make
adjustment manually.
GHOST
1. Select a color element of ghost using the ◄/►
buttons.
2. A djust the selected element using the ▲/▼ buttons to
dsappear ghost.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for the interval to
show the message for cleaning up the air filter.
50h ó 100h ó 200h ó 300h ó TURN OFF
After selectng "50h", "100h", "200h", or "300h", the
message "REMINDER *** HRS PASSED AFTER THE
LAST FILTER CHECK" wll appear after the tmer
reaches the nterval tme set by the menu.
When the "TURN OFF" is chosen, the air filter
cleanng message wll not appear.
• Please check and clean the air filter periodically, even if there is no
message. If the air filter becomes to be blocked by dust or others,
the nternal temperature wll rse, whch could cause malfuncton, or
reduce the lfetme of the projector.
• It s recommended to choose "100h" n general. Please be careful
wth the operatng envronment of the projector and the condton of
the air filter, especially when the "200h", "300h" or "TURN OFF" is
chosen.
PJ358
Description
40