® NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Getting Started Congratulations on purchasing a ViewSonic PJ350 DLP projector. Save the original box and all packing material for future shipping needs. Projector Control Speaker Height Adjustment Button Air Vent Remote Control Sensor AC Connector (to the power cord) Air Vent...
• S-Video cable (for S-Video VCR) • DVI signal cable for HDTV/Component Video • RCA to Stereo Mini Audio cable • Mouse cable • ViewSonic Wizard CD-ROM (includes User Guide in PDF format) • Quick Start Guide • Carrying Case PJ350 Projector...
Connecting Input and Output Devices The illustration below shows the ports and different configurations for connecting external devices to the ViewSonic PJ350. The Package Contents illustration above shows the appropriate cables for various devices. NOTE: When using a computer as the input device, set the resolution of your computer’s graphics card to 1024 x 768 for the optimal projected image.
• When the Temp (Temperature) LED is solid orange, the projector has overheated. It will automatically shut down. Under normal conditions, the projector can be switched on again. If the problem persists, contact your local dealer for service or contact ViewSonic Customer Support. See page 21.
Mouse/Resync button • If the Remote Control cover is closed, the Mouse/Resync button functions like the Right mouse button. • If the Remote Control cover is open, pushing the Mouse/Resync button automatically sychronizes the projector with connected input devices. ViewSonic PJ350...