AdjustNg The PosTOn; Using The Automatic Adjustment Feature - ViewSonic PJ358 User Manual

Using the automatic adjustment feature

1.
Press the AUTO button on the remote control.
Pressng ths button performs the followng.
 For a PC signal
The vertcal poston, the horzontal poston, the horzontal
phase and the horzontal sze wll be automatcally adjusted.
And the aspect rato wll be automatcally set to default. Make
sure that the applcaton wndow s set to ts maxmum sze
pror to attemptng to use ths feature. A dark pcture may stll
be ncorrectly adjusted. Use a brght pcture when adjustng.
 For a signal from the USB STORAGE
The aspect rato wll be automatcally set to the default.
 For a video signal, s-video signal or component video signal
The vdeo format best suted for the respectve nput sgnal wll be selected
automatcally. Ths functon s avalable only when the AUTO s selected for
the VIDEO FORMAT tem n the INPUT menu.
The vertcal poston, horzontal poston and aspect rato wll be automatcally
set to the default. For a component vdeo sgnal, also the horzontal phase
wll be automatcally set to the default.
● The automatic adjustment operation requires about 10 seconds. Also please
note that t may not functon correctly wth some nput. When ths functon
s performed for a vdeo sgnal, a certan extra such as a lne may appear
outsde a pcture.
Adjusting the position
1.
Press the POSITION button on the remote control.
The "POSITION" ndcaton wll appear on the screen.
2.
Use the ▲/▼/◄/► cursor buttons to adjust the picture
poston.
When you want to reset the operaton, press the RESET button
on the remote control durng the operaton.
To complete ths operaton, press the POSITION button agan.
Even f you do not do anythng, the dalog wll automatcally
dsappear after a few seconds.
● The POSITION button does not work for a signal from the USB STORAGE port.
● When this function is performed on a video signal, s-video signal or component
vdeo sgnal, some mage such as an extra-lne may appear at outsde of the
pcture.
● When this function is performed on a video signal, s-video signal, or component
vdeo sgnal, the range of ths adjustment depends on the OVER SCAN n the
IMAGE menu settng. It s not possble to adjust when the OVER SCAN s set
to 10.
ViewSonic PJ358
Operating
AUTO
COMPUTER/
STORAGE SEARCH
VIDEO
BLANK
ASPECT AUTO
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
MENU
POSITION
ENTER
RESET
ESC
COMPUTER/
STORAGE SEARCH
VIDEO
BLANK
ASPECT AUTO
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
POSITION MENU
ENTER
RESET
ESC
POSITION
17