ViewSonic PJ358 User Manual page 43

OPTION Menu
OPTION Menu (continued)
Item
AUTO OFF
LAMP TIME
FILTER TIME
(contnued on next page)
ViewSonic
Using the ▲/▼ buttons adjusts the time to count down to
automatcally turn the projector off.
Long (max. 99 mnutes) ó Short (mn. 0 mnute = DISABLE)
When the tme s set to 0, the projector s not turned off automatcally.
When the tme s set to 1 to 99, and when the passed tme wth no-
sgnal or an unsutable sgnal reaches at the set tme, the projector
lamp wll be turned off.
If one of the projector's buttons or the remote control buttons
s pressed or one of the commands (except get commands) s
transmtted to the control port durng the correspondng tme,
projector wll not be turned off.
Please refer to the secton "Turnng off the power".
The lamp tme s the tme counted after the last resettng. It s
shown n the OPTION menu as the usage tme of the lamp.
Pressing the RESET button or the ► button displays a dialog.
To reset the lamp time, select the RESET using the ▲ button.
RESET  CANCEL
• Please reset the lamp tme only when you have replaced the lamp,
for a sutable ndcaton about the lamp.
• For the lamp replacement, see the secton "Lamp".
The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the usage time of the air filter.
Pressing the RESET button or the ► button displays a dialog.
To reset the filter time, select the RESET using the ▲ button.
RESET  CANCEL
• Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section "Air filter".
PJ358
Description
AUTO OFF
ENABLE
1
AUTO OFF
DISABLE
0
38