Before First Use - AEG FSK93718P User Manual

Hide thumbs Also See for FSK93718P:
Table of Contents

Advertisement

Available languages

Available languages

successful. Refer to "Daily use" chapter to
activate remote start.
If the connection is unsuccessful or the
display shows Updating, refer to
"Troubleshooting" chapter.
To cancel the procedure, press any active
button and confirm the cancellation.
Alternatively, deactivate and activate the
appliance.
8.2 How to deactivate the wireless
connection
Enter setting mode, select the setting WiFi
and change its value to OFF.
8.3 How to activate the wireless
connection
Enter setting mode, select the setting WiFi
and change its value to ON.

9. BEFORE FIRST USE

1. Adjust the level of the water softener
according to the hardness of the water
supply.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start Quick programme to remove any
residuals from the manufacturing
process. Do not use detergent and do not
put dishes in the baskets.
After starting the programme, the appliance
recharges the resin in the water softener for
up to 5 minutes. The washing phase starts
only after this procedure is complete. The
procedure is repeated periodically.
9.1 The salt container
CAUTION!
Use only regeneration salt for
dishwashers. Do not use kitchen salt.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in daily use.
16
ENGLISH
Refer to "Daily use" chapter to activate the
remote start.
8.4 How to reset the network
credentials
If you want to connect to a different wireless
network or update the credentials of the
current network, reset the network
credentials.
Enter setting mode and activate the setting
Forget network.
The indicator
is off.
Connect the dishwasher to the network and
to the app to enter new network credentials.
Refer to the instructions provided earlier in
this chapter.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with dishwasher salt
(until it is full).
4. Carefully shake the funnel by its handle to
get the last granules inside.
5. Remove the salt around the opening of
the salt container.

Advertisement

Table of Contents
loading

Table of Contents