Table of Contents
Advertisement
3. Orient the Tablet Holder (62) as shown. Align
and insert the heads of the four indicated
#8 x 3/4" Shoulder Screws (15) into the four
holes in the Tablet Holder. Next, slide the Tablet
Holder downward until it snaps into place.
4. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 16 and 17). Note: Extra hardware
may be included.
3
15
7
62
Advertisement
Table of Contents
