Usb Audio - Cambridge Audio CXN100 Manual

USB Audio

Last updated: February 1, 2024 01:33. Revision #11533
Important note: Before setting up your device for the first time, please make sure that the USB Audio connection is unplugged. USB Audio can be
re-connected once any firmware updates are applied.
PC Setup
Note: Before connecting your PC to the Network Player, ensure you install the required Cambridge Audio Windows 2.0 USB driver on your PC.
Please find information on the most recent USB Audio driver here, and a link to download the latest driver here.
1. Connect your device to your PC.
After installing the correct driver, using a USB Audio cable (Type A to Type B), connect the USB Audio In on your device to a USB port on the
PC.
2. Select the USB Audio source.
This can be done using the source selector on the front of the device, or by going to the Home tab and then selecting USB Audio within
the Sources section of the StreamMagic app.
3. Navigate to the CA Control Panel which should now be installed in your Windows taskbar. This will show any connected Cambridge Audio USB
Audio device and current sample rate.
25