Getting Connected - Cambridge Audio CXN100 Manual

12

Getting connected

Last updated: February 1, 2024 01:33. Revision #11531
Basic Analogue Connections
Important Note: Switch the power off before making any connections.
There are two analogue connection options for the CXN100.
1. Line Output Connection (RCA)
2. Balanced Audio Connection (XLR)
The balanced connection is the higher quality option and can reject noise and interference in the cable when used with other equipment that
supports this function.
Note: XLR connectors should be wired as follows: Pin 1: Ground, Pin 2: Hot (in-phase) and Pin 3: Cold (phase-inverted).