Yamaha WR25R 2008 Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
1 2
1
2
3
3
1. Stopwatch indicator "
4
2. Tripmeter A indicator "
Distance-compensation tripmeter "
3. Tripmeter B indicator "
5
TIP
6
G
The multi-function display can be
set to the basic mode or the mea-
7
surement mode.
G Tripmeter A will automatically re-
set to zero when changing from
8
the basic mode to the measure-
ment mode or vice versa.
9
Basic mode:
G
a speedometer (which shows the
riding speed)
G an odometer (which shows the to-
tal distance traveled)
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G
a clock
G
a self-diagnosis device
"
Measurement mode:
"/
G
a speedometer (which shows the
"
riding speed)
"
G
a distance-compensation tripme-
ter (which shows the accumulated
distance traveled since set to zero
and which can be calibrated to pro-
vide a more accurate tripmeter
reading)
G
a stopwatch (which shows the time
that has been accumulated since
the start of stopwatch measure-
ment)
G a self-diagnosis device
TIP
G Be sure to turn the key to "ON" be-
fore using the "SELECT 1",
G
G
Basic mode
Odometer and tripmeter modes
Push the "SELECT 2" button to switch
the display between the odometer
mode and the tripmeter modes A and B
in the following order:
odometer → tripmeter A → tripmeter B
→ odometer
4-4
"SELECT 2" and "RESET" but-
tons.
When the key is turned to "ON", all
of the display segments of the
multi-function display will appear
and then disappear, in order to test
the electrical circuit.
To switch the speedometer and
odometer/tripmeter displays be-
tween kilometers and miles, press
the "SELECT 2" button until the
display changes after the main
switch is turned to "ON".