Silvercrest SKF 2800 B2 Operating Instructions Manual page 34

You should therefore avoid frying foodstuff s with a high starch content, for
example chips, at temperatures above 170°C. The foodstuff s should only be
fried to golden-yellow, instead of dark or brown. This is the only way to achieve
low-acrylamide cooking.
Deep frying
We recommend cooking oil or liquid cooking fat for use in this deep fat fryer.
You can also use solid cooking fats. Read the chapter "Solid Cooking Fats" for
more information.
Preparation
1) Place the appliance on a horizontal, level, stable and heat-resistant surface.
NOTE
► If you wish to place the deep fat fryer below the cooker extraction hood,
ensure that the cooker is switched off .
2) Unwind all of the power cable from the cable spool 7.
3) Open the appliance lid by pressing the lid release button 6. The appliance
lid fl ips open.
4) Pull the handle upwards until it audibly engages. Remove the frying basket 3.
TIPS
► Only use oils or fats which are specifi cally labelled as non-foaming and
are suitable for deep frying. This information is to be found on the packag-
ing or the label.
► Never mix diff erent types of oil or fat! The deep fat fryer could froth over.
5) Fill the dry and empty deep fat fryer (with inserted control/heating element 5)
with cooking oil, liquid or molten fat (about 3 litres of oil or about 2.5 kg of
solid fat).
NOTE
When charging the stainless steel container 4 with oil or fat, NEVER fi ll it
►
to above the MAX marking or to below the MIN marking.
6) Insert the power plug into the mains power socket.
RISK OF ELECTRIC SHOCK
► The power cable must not come into contact with the hot parts of the deep
fat fryer. Danger of electric shock!
SFK 2800 B2
GB
31