Camera(1920X1080P) Instructions - Walkera RUNNER 250 PRO Quick Start Manual

GEAR
C
o
•
•
1
GEAR
r
Zr=LEI Quick Start
Guide
12.0 Camera(1920x1080P) Instructions
Tips:
• A Micro SD card must be inserted into the camera before power on and removed after power off.
(A high speed SD card is recommended.)
• Insert the Micro SD card, after the camera power on, the red indicator will keeps solid.
12.1 Pictures illustration
'0
et
• 00
sv
1. Shutter Button
2. Red Indicator
3. Power port(DC 5V)
4. Video/Photo Switch
5. Micro SD card slot
IV
sr
0,
° Backside Front
12.2 Video instruction
Manual Operation
Turn the Video/Photo Switch to oi , press the shutter button once to start recording (the Red indicator flashes
for 0.5sec interval); Press the shutter button again to stop recording (The Red indicator keeps solid).
DEVO 7 Remote Controller Operation
C) Please turn the video/photo switch to " rG
"
position.
0
Start video:
turn the
GEAR switch
from "0" posi t i o n to "1" posi t i o n, wai t for 1-2 seconds, then return to the "0"
posi t i o n, the camera wi l l start recordi n g
(the red indicator keeps flashing with an interval of 0.5 second).
wait for 1-2
seconds
Stop recording:
turn the
GEAR switch
from "0" position to "1" position, wait for
1-2 seconds, then return to the "0" posi t i o n,
the camera will stop recording
(the red indicator keeps solid red).
GEAR switch
to "0" position
GEAR 0
•
•
1
GEAR switch
to "1" position
GEAR switch
to "0" position
Qj
Attention:
• You must stop recording to store the video on the SD card. The video will not be stored if you turn off
the power before stopping the recordin g.
12.3 Photo instruction
Manual Operation
Turn the video/photo switch to
el,
press the shutter button once, camera will take a photo (the red indicator
light out once then keeps solid red), press the shutter button again, it will take another photo.
DEVO 7 Remote Controller Operation
0 Please turn the video/photo switch to " C
"
position.
0 Turn the
GEAR switch
from "0" position to "1" position, wait for 1-2 seconds, then return to the "0" position,
the camera will start to take a photo (the red indicator li g ht out once then keeps solid red), operate again to
take another photo, and so on.
-18-