Syslog - D-Link DPH-120SE User Manual

PnP Server
PnP Port
PnP Transport
PnP Interval
Phone Flash
Server Address
Config File Name
Protocol Type
Update Interval
Update Mode
TR069 Settings
Enable TR069
ACS Server Type
ACS Server URL
ACS User
ACS Password
TR069 Auto Login
"Inform" Sending
Period

SYSLOG

7.3.1.23
Syslog is a protocol which is used to record the log messages with client/server
mechanism. Syslog server receives the messages from clients, and classifies them
based on priority and type. Then these messages will be written into log by some
rules which administrator can configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency:This is highest default debug info level. You system cannot
work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
when it boots up. Any SIP server understanding that
message will reply with a SIP NOTIFY message
containing the AutoProvisioning Server URL where
the phones can request their configuration.
Specify the PnP Server.
Specify the PnP Server.
Specify the PnP Transfer protocol.
Specify the Interval time, unit is hour.
SetFTP/TFTP/HTTP server IP address for auto
update. The address can be IP address or Domain
name with subdirectory.
Set configuration file's name which need to update.
System will use MAC as config file name if config file
name keep blank. For example, 000102030405.
Specify the Protocol type FTP, TFTP or HTTP.
Specify update interval time, unit is hour.
Different update modes:
1. Disable: means no update.
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
Enable TR069 by selecting it.
Specify the ACS Server Type.
Specify the ACS Server URL.
Specify ACS User.
Specify ACS Password.
Enable TR069 Auto Login by selecting it.
Specify the "inform" Sending Period, unit is second.