D-Link DPH-120SE User Manual page 12

3. Press Back, then choose PPPoE Set, press Enter.
4. The screen will show the current information.Press Del to delete it, then input
your PPPoE user and password and press Save.
5. Press Back six times to return to the idle screen.
6. Check the status. If the screen shows "Negotiating..."it shows that the phone is
trying to access to the PPPoE Server; if it shows an IP address, then the phone has
already get IP with PPPoE.
Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)
1. Prepare the network's parameters first, such as IP Address, Net mask,
Default Gateway and DNS server IP address. If you don't know this information,
please contact the service provider or technician of network.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and choose
network ->WAN settings->Connection Mode, enter and choose Static through
navigation keys and press the Save key
.
3. Press Back, then choose Static Set, press Enter.
4. The screen will show the current information, and then press Del to delete.
Input your IP address, Mask, Gateway, DNS and press Save to save what you
input.
5. Press Back six times to return to the idle screen.
6. Check the status, the screen shows "Static" .the screen shows the IP address
and gateway which were set just now, if the phone could display the right time, it
shows that Static IP mode takes effect.
Setting DHCP mode
Press Menu->Settings->Advanced Settings, then enter passwords, and choose
1.
network ->WAN settings->Connection Mode, enter and choose DHCP through
navigation keys and press the Save key
.
Press back six times to return to the idle screen.
2.
3. Check the status, the screen shows "DHCP", if the screen shows the IP address
and gateways which were set just now, it shows that DHCP mode takes effect.