Table of Contents
Advertisement
Field name
Auto Update
Setting
Current Config
Version
Common Config
Version
CPE Serial Number
User
Password
Config Encrypt Key Input the Encrypt Key, if the configuration file is
Common Config
Encrypt Key
Save Autoprovision
Information
DHCP Option
Setting
DHCP Option
Setting
Custom DHCP
Option
Plug and Play
Enable PnP
Auto Provision
explanation
Show the current config file's version. If the version
of the configuration downloaded is higher than the
version of the running configurations, the auto
provision would upgrade, or stop here. If the endpoints
confirm the configuration by Digest method, the
endpoints wouldn't upgrade configuration unless the
configuration in the server is different with the
running configuration.
Show the common config file's version. If the
configuration downloaded and the running
configurations are the same, the auto provision would
stop here. If the endpoints confirm the configuration
by Digest method, the endpoints wouldn't upgrade
configuration unless the configuration in the server is
different with the running configuration.
Show CPE Serial Number.
Specify FTP/HTTP/HTTPS server Username. System
will use anonymous if username keep blank.
Specify FTP/HTTP/HTTPS server Password.
encrypted.
Input the Common Encrypt Key, if the Common
Configuration file is encrypted.
Save the username and password authentication
message of http/https/ftp and input ID message in the
phone until the url in the server changes.
Specify DHCP Option. DHCP option supports DHCP
custom option and DHCP option 66 and DHCP option
43 to obtain the parameters. You could choose one
method among them; the default is DHCP option
disable.
A valid Custom DHCP Option is from 128 to 254. The
Custom DHCPOption must be in accordance with the
one defined in the DHCP server.
Enable PnP by selecting it, than the phone will send
SIP SUBSCRIBE messages to a multicast address
Advertisement
Table of Contents
