Table of Contents
Advertisement
6. Identify the Right Inner Grip (102), and attach it
to the right side of the handrail assembly (D) with
four #8 x 3/4" Screws (4); start all four Screws,
and then tighten them. Do not overtighten the
Screws.
Attach the Left Inner Grip (101) to the left side
of the handrail assembly (D) in the same way.
7. See the inset drawing. Make sure that the
wires (119, 120) are inserted over the indi-
cated boss (R) and under the other three
bosses (N). Do not pinch the wires during
this step.
Identify the Right Outer Grip (103), and press
it onto the handrail assembly (D) and the
Right Upright (114) as shown. Note: The nine
indicated tabs (O) must slide into the corre-
sponding square holes (P) in the Right Outer
Grip.
Then, tighten a #8 x 3/4" Screw (4) into the Right
Outer Grip (103) in the location shown.
Attach the Left Outer Grip (not shown) to the
left side of the treadmill in the same way.
6
101
102
7
O
O
D
O
O
114
O
Side View
11
D
4
O
4
O
P
119,
120
103
R
119,
120
N
4
Advertisement
Table of Contents
