Operation; Emptying The Grass Bags; Clearing Obstructions From The Bagger - Toro TITAN ZX Series Operator's Manual

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.
WARNING
To avoid personal injury, follow these procedures:
• Become familiar with all operating and safety
instructions in the Operator's Manual for the
mower before using this attachment.
• Never remove the discharge tube, bags, bagger
top, or the chute while the engine is running.
• Always shut the engine off and wait for all
moving parts to stop before clearing an
obstruction from the bagging system.
• Never do maintenance or repairs while the
engine is running.

Emptying the Grass Bags

Be careful when lifting or handling a grass bag that is
full. To empty the grass bags:
1. Park the machine on a level surface and disengage
the blade control switch.
2. Move the motion control levers outward to the
neutral lock position, stop the engine, remove the
key, set the parking brake and wait for all moving
parts to stop before leaving the operating position.
3. Open (raise) the bagger top (Figure 11).
Figure 11
4. Compress debris into the bags. With both hands,
lift up on the bag and unhook it from the retaining
bracket. Empty the bag. Repeat the procedure for
the other bag.
5. Install the bags by sliding the bag frame hooks onto
the retaining brackets (Figure 12).
1. Bag
2. Bagger frame
6. Lower the bagger top onto the bags.
Clearing Obstructions from
the Bagger
1. Park the machine on a level surface and disengage
2. Move the motion control levers outward to the
3. Check the grass bags and empty them if they are full.
G005758
4. Remove and separate the discharge tube and chute
5. After you remove the obstruction, install the
8
1
4
3
G005672
Figure 12
the blade control switch.
neutral lock position, stop the engine, remove the
key, set the parking brake and wait for all moving
parts to stop before leaving the operating position.
from the bagger top and mower. Using a stick
or similar object, carefully remove and clear the
obstruction from the mower, discharge tube, chute,
and the bagger top.
complete bagger system and resume operation.
2
3. Retaining bracket
4. Bag frame hook