Table of Contents
Advertisement
WIRING: 4-PIN Shock Sensor (22 Gauge wires)
SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the
sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED's on the shock sensor to assist
you in adjusting sensitivity. The Blue LED indicates the "Warn Away" level and the Red LED indicates a full alarm
shock sensor violation.
Use the adjustment knob to set the sensitivity of the sensor. The adjustment knob adjusts both Pre-Warn and alarm
trigger.
SHOCK SENSOR
(Pre-Warn)
BLUE LED
(Trigger)
RED LED
Adjustment
(-) TRIGGER
YELLOW
(-) PRE-WARN
ORANGE
GROUND
RED
12 VOLTS
BLACK
12
Hide quick links:
Advertisement
Table of Contents
