Table of Contents
Advertisement
Mirrors
5
Adjusting mirrors
110
Pivot the mirror to the correct
z
position by pressing gently at
the edge of the glass.
Headlight
Headlight beam throw and
spring setting
The headlight beam throw gen-
erally remains constant due to
adjustment of the spring setting.
Adjustment of the spring setting
may only be inadequate if the
load is very high. In this case, the
headlight beam throw must be
adjusted to the weight.
NOTICE
If there are doubts about the cor-
rect headlight beam throw, have
the setting checked by a special-
ist workshop, preferably an au-
thorised BMW Motorrad dealer.
Adjusting headlight beam
throw
Requirement
If, with a high load, the adjust-
ment of the spring setting is no
longer sufficient not to dazzle on-
coming traffic:
The headlight beam-throw is
adjusted via a bell crank.
A Position with a light load
(only rider)
B Position with rider with load
C Position with high load (with
two-up mode)
Windscreen
Adjusting windscreen
Switch on the ignition.
As you ride off, the windscreen
automatically moves to its last
position before the ignition was
switched off.
Advertisement
Table of Contents
