Advertisement
Twin-output models
4
Setting Functions in SET Mode
Set the mode selector
to
.
SET
SET
Digital incident level display
Setting the
operating mode
The operating mode for the channel set
with the channel-selection switch can be
changed.
Changed using the channel-selection switch
Channel 1
L ON
(Factory setting)
TEACH
D ON
MODE
Sensing function
2s
Standard
Super-long distance
Super-high speed
(B)
(A)
@ Area Sensing
Area sensing is possible using the threshold values
for channels 1 and 2.
· If channel 1 is set to L/ON, output turns ON when
the incident level is between the thresholds.
· If channel 1 is set to D/ON, output turns OFF
when the incident level is between the thresholds.
The result is output to control output 1.
(Control output 2 is always OFF.)
A-432
TEACH
Changing the
operating mode
CH1
CH2
Channel 2
L ON
(Factory setting)
TEACH
D ON
Displayed as "F".
(factory-set)
TEACH
TEACH
TEACH
Area
TEACH
There are four different sensitivity settings. Refer to page AB- for
details.
(B)
(A)
MODE
Timer function
2s
MODE
2s
Flashing setting
OFF
MODE
Hold setting
2s
OFF
MODE
Display orientation
2s
setting
Standard
Advanced Photoelectric Sensors
Displayed as "t".
0
(Factory-set)
TEACH
Adjustable in 1-ms units for 0
to 20 ms and in 5-ms units
for higher.
200
TEACH
Displayed as "L".
(Factory-set)
TEACH
ON
TEACH
Displayed as "H".
(Factory-set)
TEACH
Peak
TEACH
Bottom
TEACH
Reversing display
(Factory-set)
TEACH
Reverse
TEACH
Advertisement
