Assigning Pair Signals To Cross-Point Buttons - Sony MVS-3000A System Startup Manual

Keyboard window
d Press [Enter].
e Repeat steps 1 to 4 as required to assign other
signals.
Notes
Up to 16 characters can be entered for signal names.
Memo
You can also set the color for cross-point buttons
assigned with signals.
Assigning Pair Signals to Cross-
Point Buttons
You can assign video and key signals, shown below, as a
pair to each cross-point button.
Video signal
1
Display the menu.
a Open the Engineering Setup >Panel >Xpt Assign
menu (7322).
b Press [Main, V/K Pair Assign].
The Main, V/K Pair Assign menu (7322.5) appears.
2
Assign a video signal to the cross-point button.
Enter
a In the [V/K] column of the list on the left, select the
b In the <Assign> group, press [Video], turning it on.
c In the list on the right, select the signal you want to
d In the <Xpt Assign> group, press [Set].
When assigning the same signal to the video and key,
turn on both [Video] and [Key] in the <Assign> group.
In this case, the procedure in step 3 is not required.
3
Assign a key signal to the cross-point button.
a In the <Assign> group, press [Key], turning it on.
b In the list on the right, select the signal you want to
c In the <Xpt Assign> group, press [Set].
Key signal
You can also edit the lists using [Insert] and [Delete]
in the <Xpt Assign> group.
4
Repeat steps 2 and 3 as required to assign other
signals.
For details about using assigned pair signals using a
keyer, see "Entering Titles using Luminance Keys"
(1 p. 53).
V/K
Video Key Set
Main, V/K Pair Assign menu
number of the cross-point button.
In this example, select "1".
assign as the video signal.
In this example, select "CAM1".
The video is assigned.
Memo
assign as the key signal.
In this example, select "Key1".
The key is assigned.
Memo
Assigning Signals to Cross-Point Buttons
23