Table of Contents
Advertisement
Operating instruccions Peristaltic Pumps
THE FOLLOWING CAN CAUSE SERIOUS DAMAGE AND INJURY:
- Improper use
- Removal of the protections and/or disconnection of protective de-
- Lack of inspections and maintenance
The person responsible for safety should therefore guarantee that the pump is transpor-
ted, installed, put in service, used, maintained and repaired by qualified personnel who
should possess:
- Specific training and sufficient experience for the tasks.
- Knowledge of the technical standards and applicable laws.
- Knowledge of the national and local safety and installation stan-
Any work carried out on the electrical part of the pump should be authorized by the per-
son responsible for safety.
Given that the pump is intended to form part of a system, it is the responsibility of whoever
supervises the installation of the entire system to guarantee absolute safety, adopting the
necessary measures of additional protection.
2.5.
General safety information
Live parts
Possible consequence: fatal or very serious injuries.
- Risk mitigation: the device must be disconnected from the power
- Isolate damaged, faulty or manipulated devices from the mains in
Lack of emergency stop switch
Possible consequence: fatal or very serious injuries.
An emergency stop switch must be connected for the entire system.
This should enable the entire system to be shut down in the event of an
emergency in such a way that the overall system can be brought into
a safe condition.
Unauthorized access
Possible consequence: Fatal or very serious injuries.
- Risk mitigation: ensure that there can be no unauthorized access to
RBT Series
vices
dards.
supply before it is opened
order to de-energize.
the pump or to the system.
4
Advertisement
Table of Contents
