Table of Contents
Advertisement
2.
Safety
2.1.
Explanation of the safety information
This symbol identifies the instructions of this manual, which must be
observed to avoid failure to meet safety standards.
This symbol identifies the instructions of this manual, which must be
observed to avoid compromising electrical safety.
This symbol identifies the instructions of this manual, which must be
observed to guarantee the correct operation of the pump.
Other documentation supplied: instructions in all additional documentation supplied with
the pump must also be followed (instructions for components such as gearbox, motor,
sensor, frequency controller).
2.2.
Intended use
The hose pump is exclusively designed for pumping suitable products. Every other or fur-
ther use is not in conformance with the intended use. In case of doubt it is the use which
appears to be its intended use judging from the construction, execution and function
of the product. Observing the instructions in the user's documentation also belongs to
intended use.
Only use the pump in conformance with the intended use described above. The manu-
facturer cannot be held responsible for damage or harm resulting from use that is not in
conformance with the intended use. If you want to change the application of your hose
pump, contact BOYSER.
2.3.
Responsibility
The manufacturer does not accept any responsibility for damage or harm caused by not
(strictly) observing the safety regulations and instructions in this manual and the also su-
pplied documentation, or by negligence during installation, use, maintenance and repair
of the hose pumps mentioned on the front cover. Depending on the specific working con-
ditions or accessories used, additional safety instructions can be required.
2.4.
User qualifications
Pumps are machines that can present dangers due to moving parts and the presence of
a pressurised fluid within the hose.
3
Advertisement
Table of Contents
