Omcan FR-CN-0166 Instruction Manual page 7

• When removing refrigerant from a system, either for servicing or decommissioning, it is recommended
good practice that all refrigerants are removed safely.
• The recovery equipment shall be in good working order with a set of instructions concerning the equipment
that is at hand and shall be suitable for the recovery of all appropriate refrigerants including, when
applicable, FLAMMABLE REFRIGERANTS.
• The recovered refrigerant shall be returned to the refrigerant supplier in the correct recovery cylinder, and
the relevant waste transfer note arranged. Do not mix refrigerants in recovery units and especially not in
cylinders.
CAUTION FOR USING
1. Unpack all packages before using the freezer. Don't tilt it over 60° while moving it.
2. The freezer should be installed in the environment of good ventilation, cool and dry and without corrosive
gas. It should not be installed close to heat sources or directly under the sunlight. The space more than
10cm between the wall of the front and the back of the freezer should be allowed. When installing, the
wheels should be padded well so as to make the freezer be level and stable, or it will cause vibration and
too much noise.
3. If power is cut off, wait at least 5 minutes before turning on again to avoid damage to the compressor.
4. To save energy, the door should not be frequently opened for a long time.
5. The surface and the inside of the freezer should be dry and clean. Long term moisture will cause the
freezer rust slowly. (There will be some stains on the surface.)
6. Periodical cleaning is suggested for your reference. Generally, 30 - 45 days once is best. When cleaning, it
is best to wipe the inside and the surface of the showcase with the soft cloth with neutral soap or detergent.
Attention: to ensure safety, the power plug must be pulled out before cleaning. All safety precautions
must be followed. Dispose of properly in accordance with federal or local regulations. Risk of fire or
explosion due to puncture of refrigerant tubing. Follow handling instructions carefully.
DANGER: risk of fire or explosion. Flammable refrigerant R290/R600a used. To be repaired only by
trained service personnel. Do not use mechanical devices to defrost refrigerator. Do not puncture
refrigerant tubing.
RESIDENTIAL USERS: vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
1 YEAR PART AND LABOUR WARRANTY
safety and warranty
7