Table of Contents
Advertisement
deRinse aid system
Additional runtime in
minutes
Additional water consumption
in liters
Additional consumption of electricity
in kWh
The stated consumption values are
laboratory measurements according
to the currently valid standard and
determined using the Eco 50°
program and the factory-set water
hardness value of 13 - 16 °dH.
1 1 rinse aid system
11.1 Rinse aid
For optimal drying results, use rinse
aid.
Only use rinse aid designed for
household dishwashers.
Fill in rinse aid
If the rinse aid refill indicator lights
up, add rinse aid. Only use rinse aid
designed for household
dishwashers.
The tab on the lid of the rinse aid
1.
reservoir
press and lift.
30
6
5
0.05
2
1
Fill in the rinse aid up to the max
2.
mark.
If rinse aid has overflowed, remove
3.
it from the rinse container.
Overflowing rinse aid can lead to
excessive foam formation during
the rinse cycle.
Close the lid of the rinse aid
4.
reservoir.
aThe lid clicks into place audibly.
11.2 Adjust the amount of rinse
aid added
If streaks or water stains remain on
the dishes, change the amount of rinse
aid added.
press.
1.
To open the basic settings,
2.
press.
aThe display shows H:xx.
The display shows .
Press repeatedly until
3.
the display shows the factory-set
value r:05.
or press repeatedly until the
4.
appropriate amount of rinse aid has
been added.
– A low setting adds less rinse aid
to the wash cycle and reduces
streaks on the dishes.
Max
3 seconds
a
Advertisement
Table of Contents
