Table of Contents
Advertisement
deTransport, storage and disposal
18.1 Clean the waste water
pump
Coarse food residue or foreign objects
can block the wastewater pump. As
soon as the flushing water no longer
drains properly, you have to clean the
wastewater pump.
WARNING
Risk of injury!
Sharp and pointed objects such as
broken glass can block the
wastewater pump and cause injuries.
▶
Carefully remove foreign bodies.
Disconnect the device from the power supply.
1.
Remove the upper and lower dish
2.
racks.
Remove the sieve system.
3.
Scoop out existing water.
4.
If necessary, use a sponge.
Lever out the pump cover using a
5.
spoon and grab it by the bar.
Lift the pump cover diagonally
6.
inwards and remove it.
aNow you can there
reach by hand
Leftover food and Fr
7.
area of the wing
56
s impeller with
.
emd body in
remove ads.
Insert the pump cover and press
8th.
down.
1
aThe pump cover clicks into place
cash.
Install the sieve system.
9.
Insert the lower and upper dish
10.
racks.
1 9 transport,
Storage and disposal
19.1 Dismantle the device
Disconnect the device from the power supply.
1.
Turn off the tap.
2.
Disconnect the waste water connection.
3.
Disconnect the drinking water connection.
4.
If available, loosen the fastening
5.
screws to the furniture parts.
If present, dismantle the base
6.
board.
Carefully pull out the device and
7.
retighten the hose.
2
Advertisement
Table of Contents
