Table of Contents
Advertisement
Figure 20. Remove the speakers
Go to
https://support.lenovo.com/partslookup
part:
Speakers
Remove the touchpad board bracket
Make sure the following FRUs (CRUs) have been removed.
"Remove the deco cover" on page 30
"Remove the lower case" on page 31
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove two screws then remove the touchpad board bracket.
Figure 21. Remove the touchpad board bracket
Screw specifications
M2.0 x L3.0
Go to
https://support.lenovo.com/partslookup
part:
Touchpad board bracket
to look up the Lenovo part number of the following replacement
Number of screws
2
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
41
Advertisement
Table of Contents
