Related Manuals for GreenWorks STC459
Summary of Contents for GreenWorks STC459
- Page 1 STC459 3. 3.
- Page 2 STC459...
-
Page 3: String Trimmer
2109007AU STRING TRIMMER OPERATOR MANUAL Greenworks Australia A Division Jak Max P/L 380 Foley’s Road Derrimut Victoria, Australia 3026 STC459 www.greenworksaustralia.com... - Page 5 English Description......... 2 Operation........... 6 Purpose.............. 2 Start the machine..........6 Overview............2 Stop the machine..........7 Introduction........2 Use the shoulder strap........7 Operation tips............ 7 Intended use............2 Cutting tips............7 General power tool safety Adjust the length of the cutting line....7 warnings..........
-
Page 6: General Power Tool Safety Warnings
English DESCRIPTION safety. When properly cared for, it will give you years of rugged, trouble-free performance. PURPOSE INTENDED USE This machine is used to cut grass, light weeds, and other This product is only intended for use outdoors. similar vegetation at or around ground level. The cutting plane must be approximately parallel to the ground surface. -
Page 7: Operation
English to other people or their shields or without guards or property. shields in place. • Switch on the motor only 3.2 PREPARATION when the hands and feet are • Before use, check the battery away from the cutting means. pack for signs of damage or •... - Page 8 English device or removable battery) • The power tool must be before carrying out disconnected from the supply maintenance or cleaning work. mains when removing the battery. • Use only the manufacturer’s recommended replacement • The battery is to be disposed parts and accessories.
-
Page 9: Symbols On The Product
English • Children should be supervised Symbol Explanation Wear protective gloves. to ensure that they do not play with the power tool. Do not expose the product to rain or • Do not touch moving moist conditions. hazardous parts before the Thrown objects can ricochet and re- machine is disconnected from sult in personal injury or property... -
Page 10: Installation
English 2. Push in the release button on the lower shaft. Separate collection of used machine and packaging let you recycle materials and use 3. Align the release button with the positioning hole and them again. Use of the recycled materials move the two shafts. - Page 11 English 2. Push the speed switch to the desired operating speed. While you operate the machine, the cutting line gets worn and shorter. You can adjust the length of the cutting line. Push the speed switch to position 1 for low speed or position 2 for high speed.
- Page 12 English 10.6 ASSEMBLE THE TRIMMER HEAD Before the maintenance operations: • Stop the machine. Figure 17 - 18. • Remove the battery pack. 1. Put the metal rod in the specified angle transmission hole • Cool the motor. to fix the trimmer head. •...
-
Page 13: Transportation And Storage
English TRANSPORTATION AND Problem Possible Cause Solution STORAGE The ma- The guard is not Remove the battery pack chine stops attached to the ma- and attach the guard to 11.1 MOVE THE MACHINE when you chine. the machine. cut. When you move the machine, you must: Heavy cutting line Use only with the nylon is used. -
Page 14: Technical Data
Greenworks website ) obviously. and not advanced vance the line. The Greenworks warranty is 4 years on the product, and 2 in time. years on batteries (consumer/private usage) from the date of purchase. This warranty covers manufacturing faults. A faulty product under warranty might be either repaired or replaced.
Need help?
Do you have a question about the STC459 and is the answer not in the manual?
Questions and answers