Page 7
English WARNING • If the parts are damaged, do not use the machine. • If you do not have all the parts, do not operate the machine. • If the parts are damaged or missing, speak to the service center. 1.
Page 10
English MAINTENANCE IMPORTANT Read and understand the safety regulations and the maintenance instructions before you clean, repair or do the maintenance work on the machine. IMPORTANT Make sure that all nuts, bolts and screws are tight. Examine regularly that you install the handles tightly. IMPORTANT Use only the replacement parts and accessories of the initial manufacturer.
Page 11
English 8. Put the spring in the spool housing (21). 2. Remove the spool cover (17) and the spool (20). 9. Put the spool in the spool housing. 3. Remove the coil protection (19) from the spool. 10. Put the ends of the cutting lines through the holes (23). 4.
Page 13
English Problem Possible Cause Solution Problem Possible Cause Solution The ma- The guard is not Remove the battery pack The line The machine is 1. Cut with the tip of the chine stops attached to the ma- and attach the guard to keeps used incorrectly.