Related Manuals for GreenWorks STP302
Summary of Contents for GreenWorks STP302
- Page 1 STRING TRIMMER OPERATOR MANUAL COUPE-HERBE MANUEL D’OPÉRATEUR CORTABORDES MANUAL DEL OPERADOR STP302 www.greenworkstools.com...
-
Page 3: Table Of Contents
English Description......... 4 Operation........... 8 Purpose.............. 4 Start the machine..........8 Overview............4 Stop the machine..........8 Packing list............4 Adjust the length of the cutting line....8 Line cut-off blade..........8 Important safety instructions...4 Adjust the cutting diameter........9 Symbols on the machine....5 Operation tips............ -
Page 4: Description
English DESCRIPTION WARNING Read and understand all instructions before using this PURPOSE product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. This machine is used to cut grass, light weeds, and other similar vegetation at or around ground level. -
Page 5: Symbols On The Machine
A charger that is suitable for one type of battery pack may create a risk of fire when used with Symbol Explanation another battery pack. Use only with Greenworks CAF806 Voltage charger or other CAF series. • When battery pack is not in use, keep it away from other... -
Page 6: Risk Levels
English RISK LEVELS WARNING If the battery pack cracks or breaks, with or without leaks, The following signal words and meanings are intended to do not recharge it and do not use. Discard it and replace explain the levels of risk associated with this product. with a new battery pack. -
Page 7: Attach The Edge Guide
English 3. Align the screw holes on the guard with the screw holes WARNING on the trimmer head. • If parts of the machine are damaged, do not use the machine. • If you do not have all the parts, do not operate the machine. -
Page 8: Attach The Auxiliary Handle
English OPERATION ATTACH THE AUXILIARY HANDLE WARNING 1. Remove the screws from the handle with a Phillips Wear eye protection during operation. screwdriver (not provided). 2. Attach the auxiliary handle (5) and lower clamp (15) on START THE MACHINE the shaft. 3. -
Page 9: Adjust The Cutting Diameter
English ADJUST THE CUTTING DIAMETER NOTE The machine is set at a 13 in. (330 mm) cutting diameter. You can adjust to a 15 in. (381 mm) cutting diameter. Set the cutting diameter to 13 in. (330 mm) for greater runtime and 15 in. -
Page 10: General Information
English IMPORTANT Make sure that all nuts, bolts and screws are tight. Examine regularly that you install the handles tightly. IMPORTANT Use only the replacement parts and accessories of the initial manufacturer. 10.1 GENERAL INFORMATION IMPORTANT Only your dealer or approved service center can do the 3. -
Page 11: Transportation And Storage
English TRANSPORTATION AND STORAGE WARNING Spool Remove the battery pack from the machine before transportation and storage. cover 11.1 STORE THE MACHINE • Remove the battery pack from the machine. Bump • Make sure that children cannot come near the machine. head •... -
Page 12: Technical Data
English Problem Possible Cause Solution Problem Possible Cause Solution The ma- The guard is not Remove the battery pack The line The machine is 1. Cut with the tip of the chine stops attached to the ma- and attach the guard to keeps used incorrectly. -
Page 13: Limited Warranty
(3) years against defects in materials, parts or workmanship. Greenworks, at its own discretion, will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. -
Page 14: Exploded View
English EXPLODED VIEW No. Part No. Qty Description No. Part No. Qty Description R0200097-00 Auxiliary handle assembly R0201885-00 Edge guide R0201886-00 Coupler bolt R0203076-00 Guard assembly R0201770-00 Allen key R0203077-00 String head assembly...