Technical Data; Warranty - GreenWorks STC459 Manual

EN
Problem Possible Cause
The line The machine is
keeps used incorrectly.
breaking.
The grass Cut tall grass at
winds ground level.
around the
trimmer
head and
motor hous-
ing.
The line The cut-off blade
does not cut becomes dull.
well.
Vibration The line is worn
increases down at one side
obviously. and not advanced
in time.
13

TECHNICAL DATA

Voltage
No load speed
Cutting head
Cutting line diame-
ter
Cutting path diam-
eter
Weight (without
battery pack)
Battery model
Charger model
Grass trimmer
Solution
1. Cut with the tip of the
line, avoid stones, walls
and other hard objects.
2. Advance the cutting
line regularly to keep full
cutting width.
1. Cut tall grass from the
top down.
2. Remove no more than
8" in each pass to prevent
wrapping.
Sharpen the cut-off blade
with a file or replace it.
Make sure that the line on
both sides is normal. Ad-
vance the line.
60 V
-1
6000 ±10%min (Grass trimmer),6500
-1
±10%min (Brush cutter)
Bump feed / Brush cutter blade
2.0 mm/2.4 mm
35.6 cm / 40.6 cmmm (Grass trimmer),
mm (Brush cutter)
3.85 kg
G60B2/G60B3/G60B4/G60B4 and
other BAC series
G60UC and other CAC series
Measured sound L =87 dB(A),
PA
pressure level K = 3 dB(A)
pA
Guaranteed sound L = 96 dB(A)
WA.d
power level
2
Vibration 7.5 m/s
2
m/s
English
Brush cutter
<6500
14

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks website )
The Greenworks warranty is 4 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
, k=1.5
10
L = 93dB(A), K=
Measured sound
PA
3 dB(A)
pressure level
Guaranteed sound L
WA.d
power level
Vibration 3.5 m/s
2
m/s
The maximum rotational frequency of the
spindle.
Noise value.
=105 dB(A)
2
, k=1.5