Fimco 3PT-110-6R-1025FX4 Owner's Manual page 4

Page 4
Boom Assembly Procedure
1. Mount the MX4 Center Section to the sprayer frame,
using (2) saddle bases, (2) saddle mount clamps,
(4) bolts and (4) nuts.
2. Attach the LH side MX4 Wing Assembly to the center
section, using (2) bolts and (2) nuts.
Repeat for RH side MX 4 Wing Assembly.
3. Attach the MX4 Center Harness to the center section
using (4) Phillips truss head locking screws. Then find
the end of the hose that is connected to the back of
the control valve (as indicated below) and slip a hose
clamp from the parts bag on to the end of the hose,
then with a twisting motion attach to the hose barb
tee in the center of the harness. Tighten clamp.