Fimco 3PT-110-6R-1025FX4 Owner's Manual page 15

Typical Nozzle Assembly Configurations
LH
Nozzle
#5002523 #5002522
Based on the minimum overlap required to obtain uniform distribution with 110° tips and 20" spacing.
Suggested Minimum Spray Height: 16"-18" above what is being sprayed (to plant, not ground).
Optimum Spray Height: 20"
1025FX4 Nozzle Harnesses
Tee RH
Nozzle Assembly
#5002524
Ref. #10 - MX4 LH Boom Harness (#5282572)
Ref. #7 - MX4 Center Harness (#5282902)
Ref. #12 - MX4 RH Boom Harness (#5282573)
The AIXR TeeJet Flat Spray Tip offers the benefits of obtaining
excellent drift resistance without compromising spray coverage.
Tips producing very coarse droplets do minimize drift but do not
provide the same surface coverage as tips that produce smaller
droplets. In some applications, inadequate coverage decreases
the effectiveness of the applied chemicals.
AIXR Features and Benefits
•
110° wide, tapered flat spray angle with air induction tech-
nology for better drift management.
•
Made of 2-piece UHMWPE polymer construction which
provides excellent chemical resistance, including acids, as
well as exceptional wear life.
•
Compact size to prevent tip damage.
•
Removable pre-orifice.
•
Excellent for systemic products and drift management.
Page 15