Fimco 3PT-300-8R-2BB Owner's Manual

300 gallon 3-point sprayer w/broadcast boom assembly & handgun) (pump & coupler included)

Advertisement

Quick Links

(300 Gallon 3-Point Sprayer w/Broadcast Boom Assembly & Handgun)
General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your
3 Point sprayer.
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST
If you should have a question or experience a problem with
your Fimco Industries Product: Visit our website @
www.fimcoindustries.com or call the Toll free number above. Our
technical support representatives will be happy to help you.
In most cases a customer service rep. can resolve
the problem over the phone.
To obtain prompt, efficient service, always remember to give the
following information....
• Correct Part Description and/or part number
• Model number and Serial Number
Part descriptions and numbers can be obtained from the
illustrated parts list section(s) of this manual.
Retain a copy of your receipt for your unit, as it will be required
to validate any warranty service.
Warranted against manufacturer or workmanship defects from
date of purchase with copy of receipt:
Homeowner Usage: One Year
Commercial Usage: 90 Days.
OWNER'S MANUAL
Model: 3PT-300-8R-2BB (5303772)
(Pump & Coupler Included)
WARNING:
Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
WARNING:
To reduce the risk of injury, the
user must read and understand the operator's
manual before using this product.
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5195954
Category I, II or III
(10/23)]
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3PT-300-8R-2BB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fimco 3PT-300-8R-2BB

  • Page 1 Warranted against manufacturer or workmanship defects from date of purchase with copy of receipt: www.fimcoindustries.com 1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Homeowner Usage: One Year Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 Commercial Usage: 90 Days.
  • Page 2: Table Of Contents

    Roller Pump Gen. Info/Operations/Maintenance .... 16 Troubleshooting ..............9 Dimensions ............... 17 Sprayer Exploded Views ..........10 - 13 Warranty ................18 Model: 3PT-300-8R-2BB (5303772) (300 Gallon 3-Point Sprayer w/Broadcast Boom Assembly) (Pump & Coupler Included) Technical Specifications • 300 Gallon Polyethylene Tank •...
  • Page 3: Sprayer Assembly Instructions

    Assembly Procedure Most of the sprayer has been assembled at the factory. • Follow these steps to properly assemble the sprayer. Install the hose wrap mount (handgun/hose bracket will already be attached to the mount) to the sprayer frame using (2) bolts and nuts. 2.
  • Page 4 Assembly Procedure 3/4” 1” Pump IS included with this Sprayer - for Reference ONLY 5. Using a good quality thread sealant, thread 1” fitting The roller pump IS included with the assembly. Attach into the inlet (IN) and 3/4” fitting into the outlet (OUT) the adapter, the torque bracket, torque chain, S-hook, sides of the pump.
  • Page 5: Boom Assembly Instructions

    Boom Assembly Procedure 1. Attach the Upright Boom Mount to the 3PT tube frame, using (2) hex bolts and (2) nuts. 2. Assemble the Broadcast Nozzle Mounts and Nozzles, as shown, if not already done. Mount the assembled nozzle mounts and nozzles to the upright boom mount.
  • Page 6: Operation And Calibration

    Operation Instructions Information About the Sprayer Roller pumps are positive displacement pumps, which means that the entire solution being pumped must go somewhere or the pump will break. In this roller pumping system, solution is drawn from the tank and forced to a planned source, such as boom noz- zles or handgun.
  • Page 7 Broadcast spray nozzles are great for rough terrains, road side spraying, fence rows and other areas that are difficult to apply with a traditional boom. Gallons per Acre GAL/1000 Sq. Ft. Swath BROADCAST & TURF APPLICATIONS Width (Ft) @ 40 PSI Thread XT Model 0.32...
  • Page 8: Maintenance And Tank Care

    After use, fill the sprayer tank part way with water. Start the sprayer and allow the clear water to be pumped through the plumbing system and out through the spray nozzles. Refill the tank about half full with plain water and use FIMCO Tank Neutralizer and Cleaner and repeat cleaning instructions above (If no tank cleaner is available, you may substitute dish soap for this step, about 1-2 oz.
  • Page 9: Winter Storage

    Winter Storage Drain all water out of your sprayer, paying special attention to the pump, handgun and valve(s). These items are especially prone to damage from chemicals and freezing weather. The sprayer should be winterized before storage by pumping a solution of automotive antifreeze (containing a rust inhibitor) through the entire plumbing system.
  • Page 10: Sprayer Exploded Views

    Exploded View: 3PT-300-8R-2BB (5303772) Refer to the parts list next page for part numbers. See Detail Boom Page 11 See Plumbing Detail Page 10 See Detail Hose Wrap Mount Page 10 Page 10...
  • Page 11: Sprayer Parts List

    Parts List: 3PT-300-8R-2BB (5303772) Page 11...
  • Page 12 Hoses to Booms Hose to Handgun Hose to Bypass Detail Intake See Agitator Plumbing Detail Detail See Detail Intake Hose to Detail Boom Valve Assembly Hose to Pump Intake Intake Hose Detail Hose Wrap Mount to back of TeeValve Agitator Detail Intake Hose from pump Page 12...
  • Page 13 Detail Boom Broadcast Nozzle Assemblies Page 13...
  • Page 14: Pressure Relief Valve Exploded View/Parts List

    Piston Type Pressure Relief/Regulating Valves Bypasses excess fluid. Adjustable to maintain control of line pressure at any pressure within the valve operating range. Selected pressure setting firmly held in place by locknut. Extra large passages to handle large flows. • Polypropylene with stainless steel spring •...
  • Page 15: High Pressure Spray Gun Info

    PRO SERIES Long Range Ergonomic Handguns Technical Specifications: • Adjustable Spray Pattern • No Drip Shut Off • Aluminum Barrel • Convenient Hanger Hole • 600 PSI, 8 GPM • Chemical Resistant Construction • 38’ Horizontal, 27’ Vertical Maximum Spray Distance • Integrated Trigger Lock •...
  • Page 16: Roller Pump Gen. Info/Operations/Maintenance

    Roller Pump General Safety Information Use a pressure relief device on the discharge side of the Make certain that the power source conforms to the pump to prevent damage from pressure buildup when requirements of your equipment. the pump discharge is blocked or otherwise closed and Provide adequate protection in guarding around the the power source is still running.
  • Page 17: Dimensions

    Approx. Dimensions 74” 61 5/16” 53 15/16” Page 17...
  • Page 18: Warranty

    WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco, Inc. shall, at its own cost, and at its option, either repair or replace the defective Equipment or part.

This manual is also suitable for:

5303772

Table of Contents