Electro-Voice EVERSE Series User Manual page 39

EVERSE Battery-powered Loudspeaker
10. Select EXIT to return to the home screen.
RECALL menu
The RECALL menu allows you to retrieve up to five customized user settings. Available
options for this selection are: BACK, 1, 2, 3, 4, and 5. In addition, setting 6 is available to
recall a default setting. This setting cannot be used to store user settings.
Recalling customized user settings
To recall customized user settings:
1.
2.
3.
4.
STANDBY menu
To extend battery life, the EVERSE loudspeaker will enter STANDBY mode after a set
amount of time. The STANDBY menu allows you to set the idle time (time with no audio or
control signal present) before the loudspeaker enters STANDBY mode.
To return to normal operation mode:
4
Or
4
Notice!
i
Analog input signals will not return the speaker to normal operation from STANDBY mode.
RESET menu
The RESET menu is used to reset the loudspeaker to original factory settings. Available
options for this selection are: NO or YES.
Resetting the system
To reset the system to original factory settings:
4
4
4
Notice!
i
The RESET menu item is used to revert the loudspeaker to the original factory default
settings.
INFO menu
The INFO menu is used to display the firmware version.
Refer to
–
Electro-Voice
From the DSP control menu, scroll to RECALL.
Push the MASTER VOL knob to select RECALL.
The RECALL screen appears.
Push the MASTER VOL knob to select 1.
The selected item is loaded.
After the preset is loaded, the menu will return to the home screen.
Apply a Bluetooth® audio signal or BLE control signal via the QuickSmart Mobile app.
Press any button on the loudspeaker.
From the DSP control menu, select RESET.
The DEFAULT SETTINGS? message appears.
Select YES.
The ERASE USER PRESETS? message appears.
Select YES.
Effects (FX) list, page 55
User manual
Amplifier DSP | en 39
2023-12 | 02 |