Dsp Controls - Electro-Voice EVERSE Series User Manual

28 en | Amplifier DSP
10. Status display - Alternately shows the following:
11. S - Audio streaming. The available options are:
12. C - Control app. The available options are:
System protection
System protection limiters indicate when a system is exceeding recommended usage by
indicating input CLIP or output LIMIT on the LCD display.
CLIP
CLIP indicates that the signal to the loudspeaker is too high, resulting in a clipped signal
into the loudspeaker.
If CLIP is shown:
4
LIMIT
LIMIT protects the loudspeaker from short-term peaks and long-term overload, which can
cause distortion. When LIMIT is displayed on the screen, the limiter is active.
If the LIMIT indication is shown often or continuously:
4
5.3

DSP controls

An integrated DSP control menu allows the user to select multiple DSP system settings on
the loudspeaker.
Accessing the DSP control menu
To access the DSP control menu:
1.
2.
2023-12 | 02 |
1 - Indicates the selected preset number. There are five user-defined presets available.
E - Edited. Indicates the preset is not saved. When the preset is saved, the E is not
displayed.
Lock status - Indicates that the LCD display and controls are locked. Press the
MASTER VOL knob or channel select soft key to unlock.
OFF - DISABLED
FLASHING - PAIRING MODE (120s)
SOLID - CONNECTED
OFF - DISABLED
FLASHING - PAIRING MODE
SOLID - CONNECTED
Reduce the INPUT GAIN and/or the signal on the mixer or source equipment.
Reduce the output volume (MASTER VOL). This is strongly recommended.
Push the MASTER VOL knob.
The DSP control menu appears.
Using the MASTER VOL knob, scroll through the menu items.
User manual
EVERSE Battery-powered Loudspeaker
Electro-Voice