Electro-Voice EVERSE Series User Manual page 35

EVERSE Battery-powered Loudspeaker
Available options for this selection are: MUSIC, LIVE, SPEECH and CLUB.
–
–
–
–
The default is MUSIC.
LOCATION menu
The LOCATION menu is used to optimize the loudspeaker for different boundaries.
Available options for this selection are: TRIPOD, KICKBACK, MONITOR.
–
–
–
The default is TRIPOD.
SUB menu
The SUB menu is used to select a high pass frequency for use with a subwoofer.
Available options for this selection are: OFF, 100 Hz, 120 Hz, 150 Hz, ELX200-12SP,
ELX200-18SP, EKX-15SP and EKX-18SP. The 100 Hz, 120 Hz, and 150 Hz choices are
generic high pass settings for use with other subwoofers. The ELX200-12SP, ELX200-18SP,
EKX-15SP and EKX-18SP settings are specifically optimized for subwoofers by including
delay for best summation.
The default is OFF.
TREBLE control
The TREBLE control is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter.
The default is 0 dB.
MID control
The MID control is used to adjust the midrange frequency performance of the loudspeaker
for different applications or personal preference.
The default is 0 dB.
BASS control
The BASS control is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a low shelving filter.
The default is 0 dB.
MAIN PEQ menu
The MAIN PEQ is used to adjust the frequency response of the loudspeaker for different
applications or personal preference. There are seven equalization filters available.
The filter type is selectable between the following:
PEQ - Parametric Equalization Filters shape the sound using peak/dip bell shaped filters
which have three controls.
–
–
–
Electro-Voice
MUSIC - is used for recorded music playback and electronic dance music applications.
LIVE – is used for live sound applications.
SPEECH – is used for spoken word applications.
CLUB – is used for recorded electronic music playback.
TRIPOD - is used when the loudspeaker is placed on a tripod stand or placed on a pole.
KICKBACK - is used when the loudspeaker is placed on the angled rear kickback
position. This setting compensates for the amount of low frequency boost created by
placing the loudspeaker on a level and stable flat surface.
MONITOR - is used when the loudspeaker is placed on the angled monitor panel in
monitor position. This setting compensates for the amount of low frequency boost
created by placing the loudspeaker on a level and stable flat surface.
Q - Quality Factor defines the bandwidth width of the filter. A lower Q provides a wider
bandwidth and a higher Q provides a narrower bandwidth.
FREQ - selects the center frequency of the EQ filter.
GAIN - sets the amount of increase or reduction of the equalization filter.
User manual
Amplifier DSP | en 35
2023-12 | 02 |