V-ZUG Cooler V4000 Installation Instructions Manual page 13

Fig. 49
u Loosen the counter nut and remove the crosspiece.
Fig. 50
u Hang the crosspiece on the inside of the custom door
panel and make sure it is central.
Fig. 51
u Fix the crosspiece using at least 6 screws for panel doors
and at least 4 screws for panel doors.
Fig. 52
u Pull out the fitting aids, turn them round and put them in
the adjacent opening.
* Depending on model and options
Installing the appliance in the recess
Fig. 53
u Clip the cover on the crosspiece on the handle side.
Fig. 54
u Attach the custom panel and loosely screw the lock nuts
onto the adjusting bolts.
Fig. 55
u Align the custom panel in the X and Y direction using the
adjusting bolts.
Fig. 56
u Screw on the lock nuts and check the height.
13