Fig. 35
u Remove the floor mounting bracket stopper. Loosen the
stopper by moving it and, if necessary, pull it off using
pliers.
Fig. 36
u Check that the appliance is flush in the cabinet recess.
The mounting bracket must be attached to the side wall
of the cabinet recess.
Fig. 37
u For unit side walls which are 16 mm thick, the spacers fit
against the unit recess on the hinge side.
Fig. 38
* Depending on model and options
Installing the appliance in the recess
u For unit side walls which are 19 mm thick, the front sides
of the hinges are positioned flush against the front of the
unit side wall.
Fig. 39
u If necessary, use the adjustable feet to correct the tilt of
the appliance.
Fig. 40
u Screw on the appliance on the hinge side.
Fig. 41
u Move the bracket so it sits flush on the side wall of the
cabinet recess. Tighten all the screws securely.
Fig. 42
11