Advertisement
Quick Links
Installation instructions
Heat pump dryer
Models 12017–12019, 12029
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Complete the installation of the appliance before plugging it in.
Fire hazard
Fire hazard! Models 12017–12019, 12029 contain the refrigerant R290, an environmentally friendly but flammable re-
frigerant. Keep open fire, ignition and/or heat sources such as burning candles, incense sticks, room heaters and the
like away from the appliances.
Check the appliance
Check the appliance for visible damage. Do not use the appliance if it is damaged in any way.
Keep all ventilation slits on the appliance clear and unobstructed, otherwise an adequate supply of air is not guaran-
teed.
During installation, it is imperative to observe the following
Check the following work steps in the sections specified. They show the most relevant points when installing the ap-
pliance.
B – Removing the installation plate
E – Fastening the drain hose to the appliance
1
2
H – Sliding in the appliance
3
4
1064356-13
C – Fastening the installation plate
1
F – Plumbing in
1
1064356-13
02/10/2023
2
3
Advertisement
Related Manuals for V-ZUG 12017
Summary of Contents for V-ZUG 12017
- Page 1 Complete the installation of the appliance before plugging it in. Fire hazard Fire hazard! Models 12017–12019, 12029 contain the refrigerant R290, an environmentally friendly but flammable re- frigerant. Keep open fire, ignition and/or heat sources such as burning candles, incense sticks, room heaters and the like away from the appliances.
- Page 2 1064356-13 Installation instructions 02/10/2023 Heat pump dryer Models 12017–12019, 12029 1064356-13 A – Transporting the appliance upright ≤ 90° B – Removing the installation plate and condensate drain set 3× 3× 3× W56298 1× 1× W40653 C1 – Fastening the installation plate to the floor (free-standing appliance) The installation plate can be screwed down or adhered.
- Page 3 Installation instructions 02/10/2023 Heat pump dryer Models 12017–12019, 12029 1064356-13 C2 – Adhering the installation plate to the washing machine (washer-dryer tower) In the case of the washer-dryer tower, do not drill any holes in the washing machine! Adhere the installation plate into place! 11001–11006...
- Page 4 1064356-13 Installation instructions 02/10/2023 Heat pump dryer Models 12017–12019, 12029 1064356-13 Closed niche (variant A) In the case of niche variant A, the niche door must be left open when the appliance is in operation. 2x P33002 / W54086 ≥400 cm ≥638...
- Page 5 1064356-13 Installation instructions 02/10/2023 Heat pump dryer Models 12017–12019, 12029 1064356-13 E – Fastening the drain hose to the appliance W56298 3× 3× 3× 1× 1× F – Plumbing in Never lengthen the drain hose from the tumble dryer! Otherwise the pumping-off of the condensed water is not assured.
- Page 6 1064356-13 Installation instructions 02/10/2023 Heat pump dryer Models 12017–12019, 12029 1064356-13 Washer-dryer combination (positioned side by side) Always position the drain hose from the tumble dryer above the overflow line 1. GEBERIT concealed drain traps (152.236.00.1, 152.237.00.1) need to be obtained directly from the manufacturer.
- Page 7 (as in the case of a Mittagssperre or midday power shut-off), ► or to a voltage source that is switched by a CoinSystem 1, CoinSystem 2, CardSystem 1, CardSystem 2 or VESTA cash- ier system from V-ZUG Ltd. For models installed outside Switzerland: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
- Page 8 1064356-13 Installation instructions 02/10/2023 Heat pump dryer Models 12017–12019, 12029 1064356-13 H – Positioning and levelling the appliance on the installation plate Applies to both free-standing appliances and appliances positioned in a niche. The condensed water hose and connection cable must not be crushed between the rear of the appliance and the wall or kinked during installation.