Table of Contents
Advertisement
50
5/16" FLAT WASHER
51
5/16" NYLON LOCK NUT
119 1/2" O.D. X 1/2" LONG METAL BUSHING
[ot |
120 rmEwANS LATCH HOOK
| 1 |
1
412"
PULLEY
109
41/2"
PULLEY
0 Select the 203" LONG SQUAT & AB
CABLE (44) (This Cable has both
loop ends.).
[L] Attach one end of the CABLE (44) to
the bottom end of the AB ARM (12).
Using а 5/46" X 2" HEX
HEAD
BOLT (59), bolt through the outside
of the Ат.
Assemble a 1/2" О.Ю. X
1/2" LONG METAL BUSHING (119)
onto the Bolt and then through the
Loop end of the Cable and а 5/16"
FLAT WASHER (50). Secure with a
5/16"
NYLON
LOCK
NUT
(51).
Tighten securely but leave enough
gap so that the Cable can rotate on
the Bolt.
C] Bring the CABLE (44) up and over
PULLEY M (45) located on the end of
the AB FRAME (11). Position the
CABLE TRAP BRACKET (47) at
about
the
eight o'clock position. .
Tighten the PULLEY BOLT (122)
securely. (SEE ILLUSTRATION A)
PULLEY TRAP BRACKET
POSITION
ILLUSTRATION A
Advertisement
Table of Contents
