Packet Check Principles; Configuration Procedure - H3C S5120-HI Security Configuration Manual

Enable ND detection in VLAN 2 to check the ND packets arrived on the ports. For more
4.
information about ND detection, see
Configure a static IPv6 source guard binding entry on each interface connected to a client. This
5.
step is optional. If this step is not performed, SAVI does not check packets against static binding
entries. For more information about static IPv6 source guard binding entries, see
source
Configure dynamic IPv6 source guard binding on the interfaces connected to the clients. For more
6.
information about dynamic IPv6 source guard binding, see

Packet check principles

Switch B checks DHCPv6 protocol packets from DHCPv6 clients against link-local address ND snooping
entries, checks ND protocol packets against link-local address ND snooping entries, DHCPv6 snooping
entries, and static binding entries, and checks the IPv6 data packets from the clients against dynamic
binding entries (including link-local address ND snooping entries and DHCPv6 snooping entries)
applied on the interfaces connected to the clients and against static binding entries. The items to be
examined include MAC address, IPv6 address, VLAN information, and ingress port.

Configuration procedure

# Enable SAVI.
<SwitchB> system-view
[SwitchB] ipv6 savi strict
# Enable IPv6.
[SwitchB] ipv6
# Globally enable DHCPv6 snooping.
[SwitchB] ipv6 dhcp snooping enable
# Assign interfaces GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 to
VLAN 2.
[SwitchB] vlan 2
[SwitchB-vlan2] port gigabitethernet 1/0/1 gigabitethernet 1/0/2 gigabitethernet 1/0/3
# Enable DHCPv6 snooping in VLAN 2.
[SwitchB-vlan2] ipv6 dhcp snooping vlan enable
[SwitchB] quit
# Configure interface GigabitEthernet 1/0/1 as a DHCP snooping trusted port.
[SwitchB] interface gigabitethernet 1/0/1
[SwitchB-GigabitEthernet1/0/1] ipv6 dhcp snooping trust
[SwitchB-GigabitEthernet1/0/1] quit
# Enable link-local address ND snooping and ND detection.
[SwitchB] ipv6 nd snooping enable link-local
[SwitchB] vlan 2
[SwitchB-vlan2] ipv6 nd snooping enable
[SwitchB-vlan2] ipv6 nd detection enable
[SwitchB-vlan2] quit
# Configure the dynamic IPv6 source guard binding function on downlink ports GigabitEthernet 1/0/2
and GigabitEthernet 1/0/3.
guard."
"Configuring ND attack
346
defense."
"Configuring IP
"Configuring IP source guard."