H3C S5120-HI Security Configuration Manual page 29

No. Attribute
7 Framed-Protocol
8 Framed-IP-Address
11 Filter-ID
12 Framed-MTU
14 Login-IP-Host
15 Login-Service
18 Reply-Message
26 Vendor-Specific
27 Session-Timeout
28 Idle-Timeout
31 Calling-Station-Id
32 NAS-Identifier
40 Acct-Status-Type
45 Acct-Authentic
60 CHAP-Challenge
Description
Encapsulation protocol for framed access.
IP address assigned to the user.
Name of the filter list.
Maximum transmission unit (MTU) for the data link between the user and NAS.
For example, with 802.1X EAP authentication, NAS uses this attribute to notify
the server of the MTU for EAP packets, so as to avoid oversized EAP packets.
IP address of the NAS interface that the user accesses.
Type of the service that the user uses for login.
Text to be displayed to the user, which can be used by the server to indicate, for
example, the reason of the authentication failure.
Vendor specific attribute. A packet can contain one or more such proprietary
attributes, each of which can contain one or more sub-attributes.
Maximum duration of service to be provided to the user before termination of the
session.
Maximum idle time permitted for the user before termination of the session.
User identification that the NAS sends to the server. For the LAN access service
provided by an H3C device, this attribute carries the MAC address of the user in
the format HHHH-HHHH-HHHH.
Identification that the NAS uses for indicating itself.
Type of the Accounting-Request packet. Possible values are as follows:
•
1—Start.
•
2—Stop.
•
3—Interim-Update.
•
4—Reset-Charge.
•
7—Accounting-On. (Defined in 3GPP, the 3rd Generation Partnership
Project.)
•
8—Accounting-Off. (Defined in 3GPP.)
•
9 to 14—Reserved for tunnel accounting.
•
15—Reserved for failed.
Authentication method used by the user. Possible values are as follows:
•
1—RADIUS.
•
2—Local.
•
3—Remote.
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication.
12