Table of Contents
Advertisement
•
Booster Light Patterns
SOLID GREEN
This
indicates
that your Drive Reach booster is functioning properly and there are no
issues with installation.
SOLID RED
Band has shutoff. This is due to a
feedback
loop condition called oscillation. This is a
built in safety feature that causes a band to shut off to prevent harmful
interference
with a nearby cell
tower.
Refer to Troubleshooting section.
BLINKING RED,
THEN
SOLID GREEN
This indicates that one or more of
the
booster bands has reduced power due to a
minor feedback loop condition called
oscillation.
This
is a built in safety feature to
prevent harmful
interference
with a nearby cell
tower.
If you are already experiencing
the desired signal boost, then no further adjustments are
necessary.
If you are not
experiencing the desired boost in coverage then refer to the Troubleshooting
section.
LIGHT OFF
If the Drive Reach signal booster's light is off, verify your power supply has
power.
II
Advertisement
Table of Contents
