Storage Safety; Pre-Operation Safety - Walinga Airlock 1008 Operator's Manual

OPERATOR'S MANUAL

STORAGE SAFETY

● Store the equipment in an area away from human activity.
● The storage area should be dry with a firm, level surface.
● Do not permit children to play on or around the stored machine.
● Ensure all mechanical locks are safely and positively connected.
● Coat internal surfaces with a rust inhibitor to prevent damage upon use after storage.

PRE-OPERATION SAFETY

● Safety is a primary concern in the design and manufacturing of Walinga products.
However, these efforts can be negated by a single careless act of an operator or
bystander.
● It is the responsibility of the operator to read and understand all safety and operational
instructions contained within the operator's manual and the manuals of any auxiliary
equipment. Working with unfamiliar equipment can lead to careless injuries. Ensure you
and any individual who will be working with or around the airlock understands the
information provided in the operator's manuals and is instructed in the safe and proper
use of the machine.
● Refer to the auxiliary equipment's operator's manual to become familiar with the controls
of the airlock and know how to stop the airlock and any other auxiliary equipment quickly
in the event of an emergency.
● Properly train all new personnel and review instructions frequently with existing workers.
Ensure only a properly trained and physically able individual will operate the machine.
Any individual who has not read and understood all operating and safety procedures is
not qualified to operate the machine.
● Ensure all necessary personal protective equipment including a hard hat, safety glasses
or goggles, safety shoes, gloves, and wet weather gear are in good condition. Do not
allow loose long hair, loose fitting clothing, or jewelry to be around the equipment.
● Clear the working area of debris, trash or hidden obstacles that may be hooked or
snagged, causing injury, damage or tripping hazards.
● Operate only in daylight or with sufficient artificial lighting.
● Ensure the machine is properly anchored, adjusted and in good operating condition.
Check the machine over for any loose bolts, worn parts, cracks, leaks, etc., and make
any necessary repairs. Always follow the maintenance instructions.
● Ensure that all safety shielding and guarding and safety signs are properly installed and
secured, and are in good condition.
● The rotating blades of the airlock rotor can cause serious bodily injury. The inlet and
outlet of the airlock must always be properly guarded to prevent contact with the rotor.
SAFETY 00-144474-0 A 4-5