Download
Share
Print this page
Mercia Garden Products 05DTOVPN0306DD-V1 Manual
  1. Manuals
  2. Brands
  3. Mercia Garden Products Manuals
  4. Outdoor Storage
  5. 05DTOVPN0306DD-V1
  6. Manual

Mercia Garden Products 05DTOVPN0306DD-V1 Manual

3x6 overlap pent double door storage
Hide thumbs

Advertisement

Quick Links

Download this manual
x2
2mm Drill bit

Advertisement

loading
Need help?

Need help?

Do you have a question about the 05DTOVPN0306DD-V1 and is the answer not in the manual?

Questions and answers

Related Manuals for Mercia Garden Products 05DTOVPN0306DD-V1

Summary of Contents for Mercia Garden Products 05DTOVPN0306DD-V1

  • Page 1 2mm Drill bit...

  • Page 2: Any Questions

    PLEASE SCAN HERE: ANY QUESTIONS? Scan code contact us via our customer portal.
  • Page 3 Before assembly please make sure you have a Eaves Frame - 28x28x1786mm QTY 1 suitable base ready to erect your F2828-1786mm building Door Block - 28x28x140mm QTY 2 F2828-140mm MADE IN GREAT BRITAIN Fascia - 12x95x1810mm QTY 2 S1295-1810mm Overall Dimensions: Base Dimensions: Width = 1810mm Width = 1762mm...
  • Page 4 Step 2 Pre Assembly Parts Needed - No. 5 QTY 1 Before assembling remove the transportation blocks from the bottom of each panel. Place the Floor (No. 5) on a rm and level base, ensure base has suitable drainage free Take care removing the blocks as to not damage from areas where standing water can collect.
  • Page 5 Step 4 IMPORTANT: Pre-drill before xing screws. Step 6 IMPORTANT: Pre-drill before xing screws. Parts Needed - No. 2 QTY 1 No. 4 QTY 1 Once the roof is tted, x the panels to the oor internally using Place the Front Panel (No. 2) and the Plain 50mm screws in line with the oor Gable Right (No.4) onto the Floor (No.5), bearers.
  • Page 6 Step 8 Step 7 IMPORTANT: Pre-drill before xing screws. Parts Needed - No. 9 QTY 2 Parts Needed - No. 17 QTY 1 No. 14 QTY 2 Cut the Felt (No. 17) into one sheet Attach the Door Blocks (No.9) to the measuring 1890mm and lay onto the doors using 2x30mm screws, in the roof as shown in the diagram.
  • Page 7 IMPORTANT: Pre-drill before xing screws. Step 10 Parts Needed - No. 12 QTY 2 No. 13 QTY 2 Fix the Smaller Cover Trims (No. 13) to the front of the building using 3x30mm screws per trim. Fix the Larger Cover Trims (No. 12) to It is ESSENTIAL that you apply wood the back of the building using treatment immediately after the building...
  • Page 8 PLEASE SCAN HERE: ANY QUESTIONS? Scan code contact us via our customer portal.